Phastek SPORT Compact Parts! - The Automotive Performance and Styling Parts Experts - Aftermarket Scion FR-S and Subaru BRZ Parts and AccessoriesAftermarket Car Parts and Accessories for sale online at Phastek SPORT Compact!2013 Scion FR-S and Subaru BRZ Parts, 2013 FR-S Parts, 2012 BRZ PartsPhastek SPORT Scion FR-S Subaru BRZ Parts Accessories

Free Shipping on orders over $99


Free Shipping on orders over $99




  Home > FR-S & BRZ: Suspension Parts > Camber Plates >

Raceseng Shock Top for Rear Coilover Setup :: 2013-2014 Scion FR-S / Subaru BRZ
2013 2014 Scion FR-S / Subaru BRZ Shock Top for Rear Coilover Setup by Raceseng


 
Retail Price: $612.95
Sale Price: $319.95
Savings: $293.00


Availability:: manufacturer direct
Product Code: RACESENG-FRS-BRZ-SHOCK-TOP


Model*:


Qty:  
Description
 

2013, 2014 Scion FR-S / Subaru BRZ Shock Top for Rear Coilover Setup by Raceseng

The Raceseng Shock Tops provide a much needed 2 inches of extra rear shock travel. Each Shock Top extends the shock's shaft further up into the mount; allowing you to lower your car's stance without bouncing off your bump-stops as you drive. The Shock Tops are made to work with a variety of aftermarket single height adjustable coilovers. No modifications necessary, they bolt right in!





WHY DO I NEED THE SHOCK TOPS?

When you lower a car with single height adjustable coilovers, you inherently decrease the shock travel by moving the bump stop closer to the top of the shock body. We lower our car's ride height mostly to lower the center of gravity and improve handling. However, a coilover can't effectively function as a dampener if it has no shock travel. In any race application, bottoming out on the bump stop is extremely detrimental to your handling characteristics and ultimately leads to longer track times.

The Shock Tops use the architecture of the ZN6/ZC6 chassis to gain the additional space needed to move the bump stop up and away from the shock body.



HOW DO THE SHOCK TOPS WORK?

To increase the shock travel, we CNC machined our Shock Tops from a solid piece of billet aluminum. We press-fitted a spherical bearing into the topside of the Shock Top which accepts the shock shaft mounting hardware. The Shock Top's body provides the additional space to accept the bump stop; opening up the much needed shock travel.






RACESENG SHOCK TOPS

The Raceseng Shock Tops image depict what they look like installed from inside the trunk. Notice how you can see the Shock Top protruding through the opening in the chassis. This was done to maximize the shock travel.




STOCK COILOVER TOPS

The stock coilover tops image depict what an aftermarket coilover setup looks like installed from inside the trunk.




COIL SPRING PERCH

The underside of the Shock Top features a counter-bore which engages and locates the coil spring. The Shock Top will work with any 2 1/2", 2 1/4" or 60mm (I.D.) coil spring.





QUALITY USA SPHERICAL BEARINGS

We searched high and low for a USA made, high quality spherical bearing supplier. Our search ended with FK Bearings who has been manufacturing spherical bearings for the racing industry for over 40 years. FK specifically manufacturers our spherical bearings with a bearing race to ball fit that is made to take on the harshest road and race conditions. The spherical bearings also use a PTFE liner which is chemically bonded to the bearing race. We strive to use only high quality components in our products!




CUSTOMIZABLE TO ANY COILOVER

The shock nut and bushing are made specifically for each type of coilover. Please contact us at sales@phastek.com if you need assistance.

SHOCK NUT AND BUSHING

We machined the shock nut and bushing from stainless steel to provide the ultimate in corrosion resistant and longevity. The fitment of the shock nut and bushing is dependent upon the the coilover shock strut thread size and pitch. Below are the thread specs of the coilovers that we already have shock nuts and bushings made to fit.

KW V1 / V3 - M10 x 1.5mm
Cusco Street Spec A - M10 x 1.25mm
MCS Stock C - M12 x 1.25mm
RCE Tarmac Zero / Tarmac 2 - M10 x 1.5mm
ST Suspension- M10 x 1.5mm

If you know that your coilover has a thread pitch listed above; please proceed with checking out with that as your selected option and let us know what kind of coilover you have so we can add it to our fitment list.




RACESENG DESIGNED + CRAFTED

DESIGN

We design and develop our products in house! This capability allows us to create products like nothing you've ever seen or experienced. Our goal is to deliver products with a resounding sense of authenticity, where form and function fuel each other.


CRAFT

We manufacture our products in house! From cnc programming to machining production, our parts are made in house using our own manufacturing equipment. "Proudly made in the USA" may sound a bit cliche but that mantra is an integral part of the culture at Raceseng. Our joy lives in the process of crafting our own performance products.


Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

FR-S & BRZ: Suspension Parts > Camber Plates
FR-S & BRZ: Suspension Parts
FR-S & BRZ: Shop by Brand
FR-S & BRZ: Suspension Parts > Camber Adjustment
FR-S & BRZ: Suspension Parts > Coilovers