Phastek SPORT Compact Parts! - The Automotive Performance and Styling Parts Experts - Aftermarket Scion FR-S and Subaru BRZ Parts and AccessoriesAftermarket Car Parts and Accessories for sale online at Phastek SPORT Compact!2013 Scion FR-S and Subaru BRZ Parts, 2013 FR-S Parts, 2012 BRZ PartsPhastek SPORT Scion FR-S Subaru BRZ Parts Accessories

Free Shipping on orders over $99


Free Shipping on orders over $99




  Home > FR-S & BRZ: Brakes > Brake Pads >

Hawk Performance HP Plus Rear Brake Pads #HB671N.628 :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
2013 Scion FR-S / Subaru BRZ Hawk Performance HP Plus Rear Brake Pads #HB671N.628


 
Alternative Views:


Retail Price: $121.18
Sale Price: $103.00
Savings: $18.18


Availability:: product in stock ready to ship
Product Code: HAWK-FRS-BRZ-PADS-HB671N.628
Qty:

Description Warranty Information
 

2013 Scion FR-S / Subaru BRZ Hawk Performance HP Plus Rear Brake Pads #HB671N.628


Hawk Performance's HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and "track day" applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials. Extremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.

- HP Plus Compound
- Wide Temperature Range
- Exceptional Stopping Performance
- Without Requiring Brake Change
- Extremely High Friction Output
- Fade Resistant

Hawk Brake Pad Installation Procedure

- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
- Inspect calipers for freedom of movement. Lubricate where necessary.

Hawk Brake Bedding-in Procedure
- Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
- Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
- DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
- Allow 15 mintues or more for the brake system to cool down.
- Your new Hawk pads are ready for use.


Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

FR-S & BRZ: Brakes > Brake Pads
FR-S & BRZ: Brakes
FR-S & BRZ: Shop by Brand
FR-S & BRZ: Shop by Brand > Hawk