APR Radiator Cooling Plate #CF-505201 :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
|
Perrin Radiator Hose Kit #PSP-ENG-516 :: 2013-2014 Scion FR-S / Subaru BRZ
|
|
Agency Power Radiator Hose Kit #AP-FRS-151 :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
Retail Price: $165.00 Sale Price: $136.80 Savings: $28.20
|
|
|
Retail Price: $120.00 Sale Price: $108.00 Savings: $12.00
|
|
|
Retail Price: $195.00 Sale Price: $145.00 Savings: $50.00
|
|
|
|
|
|
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 The flow of air is not only limited to the outside of a car. To
maximize cooling capabilities, a radiator needs a direct flow of air to
allow an engine to maintain consistent temperatures on the race track.
Because of structural gaps above the radiator, the flow of air could
escape making the radiator not as efficient as it could be.
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 Add style and color to your engine bay and keep coolant flowing with one simple addition.
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 Your car is not only a performance machine, but a show winner. When
opening the hood for fellow enthusiasts, having a stand out engine bay
will gain great respect and clinch for awards. In addition to style, the
all new Agency Power silicone radiator hoses have a function.
|
|
|
|
Mishimoto Radiator Hose Kit #MMHOSE-BRZ-13 :: 2013-2014 Scion FR-S / Subaru BRZ
|
|
Mishimoto Aluminum Radiator #MMRAD-BRZ-13 :: 2013-2014 Scion FR-S / Subaru BRZ
|
|
Mishimoto Racing Thermostat #MMTS-BRZ-13 :: 2013-2014 Scion FR-S / Subaru BRZ
|
Retail Price: $195.00 Sale Price: $117.00 Savings: $78.00
|
|
|
Retail Price: $430.00 Sale Price: $315.00 Savings: $115.00
|
|
|
Retail Price: $69.95 Sale Price: $48.00 Savings: $21.95
|
|
|
|
|
|
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 Keep your Subaru BRZ on the road and out of the shop by upgrading to the Mishimoto silicone radiator hose kit. Mishimoto silicone hoses are manufactured with four layers of high-grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance.
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 Made of Billet 6061 Aluminum and TIG Welded with Billet Aluminum machined fittings for a proper fitting seal. These tanks were designed with racers in mind to get down the track safely, by sending all your overflowing fluids to your catch tank and not the ground.
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 The Mishimoto racing thermostat for the 2013+ Scion FR-S will promote
greater cooling efficiency in your stock or modified FA20. Once the
engine is fully warmed up, the Mishimoto racing thermostat will open at a
lower temperature than standard thermostats.
|
|
|
|
Raceseng Oil Cap #FRS-4-21 :: 2013 Scion FR-S / Subaru BRZ
|
|
Raceseng Oil Dome Cover and Lid #FRS-4-25 :: 2013 Scion FR-S / Subaru BRZ
|
|
Raceseng Cam Plate #FRS-4-52 :: 2013-2014 Scion FR-S / Subaru BRZ
|
Retail Price: $92.00 Sale Price: $75.00 Savings: $17.00
|
|
|
Retail Price: $170.00 Sale Price: $160.00 Savings: $10.00
|
|
|
Retail Price: $84.95 Sale Price: $71.95 Savings: $13.00
|
|
|
|
|
|
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 Style. You're looking at something that we did because we could. Does it increase your throttle response? No. Will it make your engine more confident about its personal appearance? Yes. Seriously though, we know that beauty is in the details, which is why we created the oil fill cap.
|
A duo meant for each other. This pair was intentionally design together to share a common design language and looking darn good at the same time. We know that beauty is in the details, which is why they created the Oil Dome and Oil Lid.
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 Smelling burning oil while doing some hard driving with your FR-S or
BRZ? The Raceseng Cam Plate is the reliable way to prevent your cam
plate from leaking oil on your exhaust manifold. This is the solution to
your oil leaking pains. This is the plate that covers the passenger
side rear of the cam that is closest to the firewall. This plate has
been the source for oil leaks in a fair share of the BRZ and FR-S
engines.
|
|
|
|
Megan Engine Mounts #MRS-SC-0640 :: 2013-2014 Scion FR-S / Subaru BRZ
|
|
Crawford Air Oil Seperator - AOS #S0711B :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
|
Greddy Magdrain Magnetic Oil Drain Plug M16x1.5 #13901304 :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
Retail Price: $359.99 Sale Price: $189.95 Savings: $170.04
|
|
|
Retail Price: $324.95 Sale Price: $319.95 Savings: $5.00
|
|
|
|
|
|
|
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 These reinforced engine mounts are perfect for enthusiast who is looking
to get the most from their vehicle as they will allow more energy to be
transferred to the wheels instead of absorbing the energy into the soft
rubber from OEM mounts.
|
Drawing on their 35 years of racing knowledge, the Crawford Closed Loop Air/Oil Separator was engineered and designed to keep all the oil where it belongs, inside the motor. Newly designed for the BRZ/FRS/GT-86 to maintain the OEM PCV valve.
|
The GReddy Magnetic Oil Drain Plug is a powerful 5000 gauss neodymium magnet. The Neodymium magnet is one of the most powerful magnet on the market. The hard anodized aluminum drain plugs are available in four popular sizes to match most Japanese vehicles. By using the "GReddy Magdrain" plug, you can help reduce the amount of abrasive materials in your engine, while extending the life of your engine.
|
|
|
|
Raceseng Revo Lightweight Crank Pulley (Black, Silver, or Red) #FRS-4-1 :: 2013 Scion FR-S / Subaru BRZ
|
|
Raceseng Revo Lightweight Idler Pulley Kit (Black or Silver) #FRS-4-13 :: 2013 Scion FR-S / Subaru BRZ
|
|
Raceseng Revo Lightweight Pulley Kit S1 (Black or Silver) #FRS-4-7 :: 2013 Scion FR-S / Subaru BRZ
|
Retail Price: $163.00 Sale Price: $152.25 Savings: $10.75
|
|
|
Retail Price: $243.00 Sale Price: $225.00 Savings: $18.00
|
|
|
Retail Price: $393.00 Sale Price: $375.00 Savings: $18.00
|
|
|
|
|
|
|
Vehicle: Scion FR-S / Subaru BRZ
Years: 2013-2014 Introducing the crank pulley weight loss plan. The Revo Crank Pulley is only .81 pounds which is 4.08 pounds lighter then the original pulley! A total of 80% weight loss means less rotational weight and faster revs, transforming what you feel upon acceleration. CNC machined from 6061 T6 aluminum and anodized for easy cleaning and corrosion resistance. Form and function come together and deliver a truly unique performance part for your FA20 engine.
|
Wait, you mean to say you don't like your stamped steel idler pulleys? Neither did we, so for the first time on the FA20 engine, you can can get lighter and more appealing idler pulleys. The Revo idler pulleys are .5 lbs lighter then the stock idler pulleys which helps reduce rotational pulley mass. A 6061 T6 aluminum machined housing and a double sealed radial ball bearing mean these idlers are built for the long haul. Raceseng didn't like the dust shield / washer either, so they made a set of those too!
|
Lighter then stock and just as strong. Their billet aluminum pulleys are tested on the road and track; taking them through every conceivable rpm range and torque differentiation. The Revo crank, water pump and alternator pulleys shave 4.73 lbs. or 70% of rotating mass from the stock engine pulleys.
|
|
|
|
Raceseng Revo Lightweight Pulley Kit S2 (Black or Silver) #FRS-4-8 :: 2013 Scion FR-S / Subaru BRZ
|
|
Perrin Engine Mount Kit #PSP-DRV-051 :: 2013 Scion FR-S / Subaru BRZ
|
|
ATI Vent Pod for Various Gauges #VPOD-72 :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
Retail Price: $513.00 Sale Price: $495.00 Savings: $18.00
|
|
|
Retail Price: $359.99 Sale Price: $323.99 Savings: $36.00
|
|
|
Retail Price: $39.99 Sale Price: $35.99 Savings: $4.00
|
|
|
|
|
|
The Revo Pulley Kit S2 is the lightest and only full billet aluminum engine pulley kit on the market! The S2 kit is the S1 pulley kit plus the billet aluminum idler pulleys. Kit includes: crank, water pump, alternator and (2) idler pulleys. A total of 5.1 lbs. have been cut from the rotating mass of the stock engine pulleys.
|
PERRIN Performance engine mount kits reduce drivetrain movement under
hard acceleration, deceleration and corning. Allowing the most efficient
transmission of all available power to the ground. This means easier
transitions from on and off throttle power in daily driving, more
accurate launches during drag racing and auto cross type events where
you do not want drivetrain slop. PERRIN engine mount kits also improve
reliability, as they can not tear apart like OEM mounts leading to other
drivetrain related failures.
|
With an ever increasing challenge in integrating gauges into well designed interiors, the vPod essentially keeps the interior unaltered by integrating gauges in the ventilation system. They blend in seamlessly.
|
|
|
|
Perrin Oil Cap :: 2013 Scion FR-S / Subaru BRZ
|
|
Perrin Oil Filter Cover :: 2013 Scion FR-S / Subaru BRZ
|
|
Cusco Water to Oil Cooler #965 012 A :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
Retail Price: $84.99 Sale Price: $53.99 Savings: $31.00
|
|
|
Retail Price: $84.99 Sale Price: $76.49 Savings: $8.50
|
|
|
Retail Price: $774.00 Sale Price: $696.60 Savings: $77.40
|
|
|
|
|
|
The PERRIN Aluminum oil cap is the finishing touch to your engine bay leaving a clean and tasteful look. PERRIN's stylish oil cap is prominently displayed sitting just to the right of the engine and is indexed so the PERRIN logo is always in the right spot.
|
PERRIN's stylish oil filter cover is prominently displayed sitting just to the right of the engine. Simply slip the cover over your oil filter to add a little something extra to your engine compartment. The best part is that there are no special tools required for installation and it does not require the removal of your existing oil filter.
|
Water to oil engine oil cooler have often been utilized in top level racing vehicles such as in the SuperGT machines. Cusco have decided to produce a kit exclusively for the Scion FR-S and Subaru BRZ (manual transmission equipped vehicles only) since managing cooler oil temperatures play a vital role in engine efficiency, no matter what level of power output.
|
|
|
|
Koyo Aluminum Racing Radiator #VH012663 :: 2013 Scion FR-S / Subaru BRZ
|
|
Mishimoto Oil Cooler Kit #MMOC-BRZ-13 :: 2013 Scion FR-S / Subaru BRZ
|
|
Perrin Oil Cooler Kit #PSP-OIL-103 :: 2013 Scion FR-S / Subaru BRZ
|
Retail Price: $396.00 Sale Price: $314.95 Savings: $81.05
|
|
|
Retail Price: $615.00 Sale Price: $522.75 Savings: $92.25
|
|
|
Retail Price: $689.99 Sale Price: $620.10 Savings: $69.89
|
|
|
|
|
|
Made of Billet 6061 Aluminum and TIG Welded with Billet Aluminum machined fittings for a proper fitting seal. These tanks were designed with racers in mind to get down the track safely, by sending all your overflowing fluids to your catch tank and not the ground.
|
Mishimoto proudly announces their all-new Direct-Fit Oil Cooler Kit specifically designed for the Subaru BRZ / Scion FR-S. This Direct-Fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling, which is perfect for your street or track BRZ/FR-S. Properly regulated oil temperatures will result in improved durability and longevity for your stock or modified 2.0L.
|
The PERRIN Performance oil cooler will reduce engine oil temperatures and extend engine life. The FR-S/BRZ engine does not have a factory oil cooler and therefore runs hotter oil temperatures then other performance vehicles. The PERRIN oil cooler tames oil temperatures keeping them at a consistent 85-90C (185f-194f) where the engine makes the most power. Keep your HP consistent with a PERRIN oil cooler.
|
|
|
|
Cusco Eco and Sports Throttle Controller #00B-712-A :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
|
Weapon R I-Throttle Controller and Harness Kit #656-112-102 :: 2013 Scion FR-S / Subaru BRZ
|
|
Weapon R Coolant Catch Tank #826-140-101 :: 2013 Scion FR-S / Subaru BRZ
|
Retail Price: $549.95 Sale Price: $502.95 Savings: $47.00
|
|
|
Retail Price: $174.95 Sale Price: $164.95 Savings: $10.00
|
|
|
Retail Price: $110.00 Sale Price: $81.95 Savings: $28.05
|
|
|
|
|
|
Does your throttle response feel a little sluggish? The Cusco throttle controller can improve the response.
|
The Weapon-R I-Throttle will allow you to adjust the amount of throttle response on all Drive by Wire vehicles. So the more advance you go the faster the throttle response will be just the opposite when you use the Economy mode feature.
|
Made of Billet 6061 Aluminum and TIG Welded with Billet Aluminum machined fittings for a proper fitting seal. These tanks were designed with racers in mind to get down the track safely, by sending all your overflowing fluids to your catch tank and not the ground.
|
|
|
|
Weapon R Oil Catch Tank #826-141-101 :: 2013 Scion FR-S / Subaru BRZ
|
|
GrimmSpeed Oil Filler Cap Billet Aluminum #120010S :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
|
Billet Oil Catch Can #BC-175 :: 2013-2014 Scion FR-S, Subaru BRZ, Toyota FT-86
|
Retail Price: $125.00 Sale Price: $104.95 Savings: $20.05
|
|
|
|
|
|
|
|
Made of Billet 6061 Aluminum and TIG Welded with Billet Aluminum machined fittings for a proper fitting seal. These tanks were designed with racers in mind to get down the track safely, by sending all your overflowing fluids to your catch tank and not the ground.
|
Welcome to the most wicked Oil Cap you will ever find. They started out with a block of 6061 Aluminum, threw in a bunch of CNC Milling time, dropped it in the anodizing tank for a custom matte finish, and then on top of that they found an expert painter to individually hand paint the red into each GrimmSpeed BRZ/FR-S Oil Cap! Yes, its that cool.
|
Traps oil before entering intake, improves fuel economy & performance, eliminates detonation from oil in the cylinder, unique three chamber design to effectively trap oil. Includes simple bracket for installation.
|
|
|
